1 / 6
Shelf Bracket / Regalwinkel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shelf bracket 200mm tall in different Versions.
- Rating
- 5 / 5
- Likes
- 126
- Downloads
- 670
- Makes
- 7
- Views
- 2,293
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Here we have shelf angles in 200mm. The brackets can be installed hanging or standing. There are 2 versions with sharp and rounded edges additionally there is 2 different versions of thickness (7 and 10mm). If further versions are desired and these cannot be implemented yourself, simply write to me.
For stable printing, I recommend the following parameters
Layer height: 0.2mm
- 1st layer hight 0.20-0.25
- Extrusion width: 0.4mm, forced
- Infill pecentage: >40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5
- Supports: NONE
- Material: ABS/ABS+/ASA/PLA/PA/PC
- Scalable