ESP32Cam Case with Antenna and Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the ESP32Cam with external antenna, wide lens, articulated base, and USB module.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 315
- Makes
- 2
- Views
- 1,481
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I made this model looking at what others have made but adjusting to my needs, (didnt remix any other model in this, made all from scratch).
I needed a strong and secure casing for my ESP32Cam with USB module, that would acomodate the external antenna (since these are trash without external antena) and also, I could mount them or paste them with double sided tape to the wall while also being able to adjust the position.
This model works with the articulation links and pieces from:
Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2
I printed the thumb bolts and thumb knots from there and using a 90 degree male to female you can reach almost any angle.
You will need:
| 4 | M2x4x3.5 | brass embeded nuts | (although it could work with 2) |
| 4 | M2x6 | stainless steal screw | (although it could work with 2) |
The only support needed maybe is the one on the "Caja" file “supports touching plate”