1 / 5
Replacement foot for Trisa 7051 crêpe oven (and similar appliances)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement foot for our Trisa 7051 crêpe oven and similar appliances.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Replacement foot for Trisa 7051 crêpe oven (and similar appliances)
This is a simple replacement foot for our Trisa 7051 crêpe oven. The original “feet” are made from silicone but we had lost one, so I drew a replacement in FreeCAD.
This may, of course, also fit other appliances, so here are the key dimensions:
Foot
d = 15 mm
h = 1.75 mm
Stem
d = 10.0 mm
h = 8 mm
4 “ribs”, each 0.25 mm thick
Printed in PLA (because it did not have TPU at the time ...) with 0.2 mm layer height and 15% infill. Print time is barely 10 min.
Enjoy 😀 and if you made it, please post a “make” and leave a “like” 😋