1 / 6
Modix V3 Clogdetector relocation mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Moves the clog-detector to the Y axis brackets above the extruder.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 58
- Makes
- 0
- Views
- 606
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Modix V3 modification to move clog-detector to the Y axis. This makes the long PTFE reverse bowden unnecessary and with that removes a lot of friction from the system. Another good thing is that there is not as much filament left in case of a filament runout.
NOTE: do NOT forget to modify the Xmax travel in config.g to a little less. This will prevent the smashing of the detector while probing. (Will post exact values herelater)
2nd is for the secondary printhead clogdetector