ITX PC cube case with sfx PSU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small cube pc case using an ITX motherboard and SFX PSU
- Rating
- 5 / 5
- Likes
- 217
- Downloads
- 1,216
- Makes
- 3
- Views
- 11,479
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The case is 5.4 liters.
It's shaped like a cube because it can easily be printed on basically any printer
COMPATIBILITY:
- Mini ITX motherboard
- Single slot low profile PCIE card
- 70 mm CPU cooler clearance (Arctic passive & AMD Wraith Spire will fit)
- SFX and SFX-L PSU
- 2.5" ssd under where the PSU cable exits (When using a SFX PSU)
EXTRA MATERIAL NEEDED:
- x14 (min x12)* m3 brass heat insert. The hole I designed is 4.25mm in diameter
- x4 standard 6mm motherboard standoff
- x4 PSU screw
- x4 Motherboard screw
- x8-10* m3 screw for the front and back panel
*the back panel has 6 screw hole but 2 are extra
All parts can be printed with basically no bridging. Just orient the parts in the right way
There's a square hole to fit a keyboard switch so it can be used as a power button
The motherboard IO plate is a separate file. Cut the hole for your motherboard. (Stock IO plate is not supported because it require extra space on the top)
There's also a blank side panel file. You can carve your own design.