1 / 3
Bar cleat for Ryobi Link - Horizontal
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Have a Ryobi Link rail and need to hang something that's on a hook or uses a clip? Here's your solution!
- Rating
- 0 / 5
- Likes
- 46
- Downloads
- 199
- Makes
- 1
- Views
- 931
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This cleat allows you to hang things that might be on a small hook or clip.
Sometimes hooks and clips can be a little grabby when taking them off the hook, so I found that using a 25mm/1 inch screw in the center hole helps keep everything securely in-place without actually touching the wall.
- If you'd like to create your own cleat, I suggest starting with my cleat for Ryobi Link.
- If you'd like to add a Ryobi Link logo to this cleat, I suggest checking out my Ryobi Link logo plate.
Suggested print settings:
- 25% infill
- Fill pattern: honeycomb
- Perimeters: 4
- Nozzle size: 0.8mm
- Supports: On
- Overture's matte grass green PLA or grass green PETG for a Ryobi look and feel