Cooler Master Elite 330 Computer Case Power Button
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.41 – €0.50 net (excluding VAT)
For file: Cooler Master Elite 330 Computer Case Power Button_0.1mm_PETG_MINI_39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.46 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 38.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement power button for the Cooler Master Elite 330 Computer Case.
- Rating
- 3 / 5
- Likes
- 5
- Downloads
- 118
- Makes
- 0
- Views
- 950
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Seems that a broken power button is common with this case and looking at the flimsy original I can see why.
This simple replacement will keep my case out of the garbage. Hopefully yours too.
I recommend printing in PETG for the flexibility, although I tried a PLA version and it was Ok.
Attach the new power button using the existing screws then use a heat gun or flame to soften the plastic and shape it as shown in the photo.
Original Fusion 360 design file is included if you need to adjust something.