Modular USB Storage
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.46 – €3.01 net (excluding VAT)
For file: USBHolder M+F_0.2mm_PLA_MINI_2h39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.73 excluding VAT (range midpoint).
- Weight reported by the author
- 36 g
- Print time reported by the author
- 2.65 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Modular USB Storage line, angled for my use.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 81
- Makes
- 0
- Views
- 584
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple USB data drive storage rack. There are five slots per print, and they can aligned together using the two pins on the male and two holes on the female variant.
The back is angled at 55 degrees, in order to best fit on the topology of my desk, and to present the USB sticks at a convenient angle for retrieval and storage.
You can align as many as you need, so long as you have the desk space.
Use you normal slicer settings, I would recommend a very small amount of support material between the two male pins, and printing the correct way up - this way the USB slots maintain dimensions and so long as your machine is calibrated the very minor supports should break off cleanly and without issue.