1 / 6
Automatic Filament Rewinder PSU Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upright case for the Meanwell LRS-50-XX PSU and the IEC 320 C14 socket, for use with the Automatic Filament Rewinder.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 74
- Makes
- 1
- Views
- 759
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
While building the Automatic Filament Rewinder, I only had IEC 320 C14 sockets with the screws on the sides and I wanted everything related to mains voltage. With this case, the PSU will be standing on its side and the whole assembly is meant to rest against the vertical board of the Rewinder. The slot next to the front mounting hole is to fix the outgoing cable with a zip tie. There are two additional poles inside where I put a LM2596 buck converter for 5V.