Hinged LED Lightbar for Prusa i3 Mk3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a re-build/reworking of https://www.prusaprinters.org/prints/882-prusa-i3-mk3-led-bar-holder-v2/.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 65
- Makes
- 1
- Views
- 1,387
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This is a re-build/reworking of https://www.prusaprinters.org/prints/882-prusa-i3-mk3-led-bar-holder-v2/. I needed a bar that would hinge out of the way for ease of access to the plate/extruder, so I reworked the original by Kenji and came up with this model. The three pieces of the arm will have to be super-glued together, and depending on the size of your lightbar, you may need a bit of felt or masking tape on the ends of the lightbar to hold it securely.
Print instructions
Printed with PET using a 0.4 nozzle and standard settings. Hinges use m3 screws and nylock nuts (simply to prevent them from falling off - they do not have to be tightened down).