1 / 4
Lumintop FW4/FW4X glow in the dark insert
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glow in the dark insert for a Lumintop FW4X flashlight.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Glow in the dark insert for a Lumintop FW4X flashlight.
Unscrew the front lens cap and place it on the lens (between the lens and the LEDs) to install. Watch out for the T notch orientation modeled to fit the LED power wires (T notch should face the LED board).
Printed with Smartfil green glow PLA, 0.2mm layer hight, 90% infill.
You can also use the model to create a reverse mold and cast it in resin with glow in the dark powder mixed in.