1 / 7
BTS700 adapter set
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
needs: approx. 700mm hose (1.25" /32mm inner diameter, (Pitch of 7.5mm)) print each part once, except "BTS-700" twice…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
needs:
- approx. 700mm hose (1.25" /32mm inner diameter, (Pitch of 7.5mm))
- print each part once, except "BTS-700" twice
- 4 wood screws (e.g. 3.5 x 25mm)
- 2 M4x12 bolts
- 2 M4 nuts
- rubber band as sealing, if needed
suggested to print it in solid
Category: DIY