Frässchablone / Router Template / Corner Radius Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Router Template can be used for router lifts and also clamped to your workpiece using Microjig clamps (14°).…
- Rating
- 5 / 5
- Likes
- 231
- Downloads
- 893
- Makes
- 8
- Views
- 5,135
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Router Template can be used for router lifts and also clamped to your workpiece using Microjig clamps (14°). Inspired by Snibis_Toolbox thing:4078971, I further worked on improving and extending the design.
All you need is 1x M4 nut and 1x M4x12mm bolt.
Category: DIY
02.02.2023 - Updated main part: now available with reduced cleranace. use this geometry if your printer is well calibrated. In my previous file I had a too large gap, since my printer was not very well set up. The clearance has now been reduced from 0.75 to 0.2mm.
15.03.2024 - added new Inlay for chamfer 30mm, Radius R30, R35 and R40, as well as a blank template to add your own needed chamfer / fillet.