1 / 3
Z-Motor mount for SV06 (squareness & rigdity)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Z motors mount for the SOVOL SV06 : more rigid to ensure a perfect squareness of the gantry. Please read below ;)
- Rating
- 5 / 5
- Likes
- 90
- Downloads
- 431
- Makes
- 5
- Views
- 4,147
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
From the original :
- Sacrificial layer for screw holes
- Added chamfer
- External side reinforcement support
- Full infil for the back and underside (near the 90° angle)
Needed for the build :
- 8 heat inserts M4x6x6
- tip = if your parts are fine, you can re-use the ones from your original parts (at your own risk if you make something wrong so be sure!)
1 - Be sure everything else is correctly assembled and square (this mod is not magic)
2 - Ensure to print with a well tuned printer and calibrate the flow especialy for the 8mm hole (even if tolerences are used you want to be max 0.1mm at the right sizes)
3 - When goes to reassemble the gantry, takes your time and few or too much mesurments, it's the best moment to do that;)
Printing parameters :
- Use at least PETG, best are ASA, ABS or ABS+ (don't use PLA / PLA+ steppers can go hot depending your configuration)
- 0.4 nozzle
- 0.2 mm layer
- 4 perimeters
- 5 top min
- 5 bottom min
- Infill 30% gyroid min
Happy printing!