Onan generator oil funnel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An oil funnel that makes adding oil to an Onan generator easier.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 138
- Makes
- 0
- Views
- 921
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Many models of Onan gas or propane powered generators for RVs have an angled fill port with a screw cap that doubles as the dipstick. A standard funnel that you would purchase at an auto parts store doesn't really help much, so I decided to design and print one specifically for the generator.
Print Instructions
I printed it in FormFutura Centaur PP using a .6mm nozzle(saved time and it's a simple part), .3 layer height and 15% infill. The gcode file for a .4mm nozzle is also included so you can compare print times. The mouth of the funnel is oriented down, on the printbed, which eliminates the need for supports.
As a side note, this could probably be printed in PETG also. I went with polypropylene since it has excellent chemical resistance to motor oil.
I hope you find it useful and please rate/post your make.