Onan generator oil funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An oil funnel that makes adding oil to an Onan generator easier.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 921
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Many models of Onan gas or propane powered generators for RVs have an angled fill port with a screw cap that doubles as the dipstick. A standard funnel that you would purchase at an auto parts store doesn't really help much, so I decided to design and print one specifically for the generator.
Print Instructions
I printed it in FormFutura Centaur PP using a .6mm nozzle(saved time and it's a simple part), .3 layer height and 15% infill. The gcode file for a .4mm nozzle is also included so you can compare print times. The mouth of the funnel is oriented down, on the printbed, which eliminates the need for supports.
As a side note, this could probably be printed in PETG also. I went with polypropylene since it has excellent chemical resistance to motor oil.
I hope you find it useful and please rate/post your make.