1 / 5
K40 Lens/Mirror Tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool to remove and replace mirrors and sometimes lenses in K40 or similar laser cutters that use 20mm fittings.…
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 85
- Makes
- 1
- Views
- 637
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
A tool to remove and replace mirrors and sometimes lenses in K40 or similar laser cutters that use 20mm fittings.
You'll need two M2 screws at least 6mm in length (but longer ones work).
It's set up so you can use a 17mm wrench, 6mm allen key or even a screwdriver shaft in case you need to deal with a tight mirror cover.
Fusion360 source file is included.
Notes:
Works nice in PETG at .3mm layer height. I printed mine at 100% infill for strength though I doubt that's necessary.