PERFECT Gloomhaven/Frosthaven Standee Set with MAGNETS
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.17 – €0.21 net (excluding VAT)
For file: 10hp plate magnet_0.2mm_PLA_MINI_13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 12.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Improved connection between standee and a 10hp plate by using magnets. Also small improvements to the upgraded top part.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 103
- Makes
- 2
- Views
- 2,511
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
This model is the first version. See improved version here:
https://www.printables.com/model/421859-magnetic-frosthavengloomhaven-standees-second-edit
Second edition features HP counter from both sides and other improvements - see the link for more information.
Info about first version
The Frosthaven finally arrived, so I printed the PERFECT Gloomhaven standees with the upgrade from Baltojikale (see links to original models). But the 10hp plates did not fit properly for me. The other issue was that the monster cards were falling out of the holder (maybe the Frosthaven ones are a bit thinner than those in original Gloomhaven).
So I remixed the design to be used with magnets. I modified the upgraded bottom part and the 10hp plates. And I used the upgraded top part and made the holders narrower by 0.1mm for the monster card and by 0.05mm in the stats card sections (for easy swapping).
Material needed: magnets 5x1.6 mm - 1x for every standee + 2x for every 10hp plate
Printed with PLA, 15% honeycomb infill. The standees are printed with 0.1mm layer with a pause command before layer 24 (set in Prusaslicer). The 10hp plate is printed with 0.2mm layer and set to change colour on layer 12 and stop before layer 21.
You need to make sure the orientation of magnets is the same in every print! The hole diameter is 5.1 mm, so it is a nice tight fit.
Fits in gloomhaven standee container: https://www.printables.com/model/165240-gloomhaven-standee-container
It works really well and I am happy with the outcome.