1 / 5
Black Panther Chain (redesigned)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A redesign of a Black Panther Chain. Have a nice print guys!
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 60
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
I redesigned the Black Panther Chain for the cults3d Cosplay contest.
The model is easy to print if you do exactly what I recommend!
It would be amazing if you post your makes with my models!
Furthermore it would be better if you print the brackets more than 10 times (just because of that you can break it by taking off from the print sheet). You can also place the single STLs onto your print sheet as you want. But !! My recommendation is to use the final gcode data. In that in mind your Alex from 3D_factorybox ;)
Settings:
- print speed: 46 mm/s or less (unless you have a clipper system, than you can print with 86 mm/s to get good results)
- infill: 55 %
- no supports, no brim and so on…
- filament: your choice
- colour: your choice