iHome Clock Radio Modification
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.12 – €0.15 net (excluding VAT)
For file: Glue on wire clips_0.2mm_PLA_MK3S_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.14 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 10.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Added charging locations to clock radio. See my Youtube video click link on my printables home page.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Please read prior to making. I have a full video on how to do the modification on youtube. Just click my youtube link on my printables page. iPad can also be charged on the original lightning plug- it will just block the phone and watch.
Made for iHome clock radio iDL43, Belkin magnetic portable wireless charger pad (amazon) and apple watch charger. This is a mount to the radio and not electronic integration. The chargers will need to plug into the wall outlet. You'll need M3 brass threaded inserts and M3 screws for the Belkin charging mount and the iPhone mount.
A couple things to keep in mind- You will need to open your radio to remove the plastic back where the iPhone would lean against when sitting on the connector- It will be replaced with the “internal mount adapter”. Watch the video and see how its done.