Hexbit screwdriver with storage box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hexbit screwdriver with 4 bit storage box
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Simple hexbit screwdriver with storage box for 4 hexbits. It is really small but still useful tool.
There are 2 versions, normal and less tight.
Thight version catch bits strong and no magnet is needed. Less thight version need magnet.
I use circle magnet 10 mm and 3 mm height.
Printing
Print without supports. If you like you can use brim or a little glue.
Look also for orientations and modifiers in 3mf files.
I you use custom setup then remember to use fusion skin for screw cap to easy rotate it (ScrewDriverCapScrew.stl) or use ScrewDriverCapScrewEasier.stl instead.
I have added 0.2 layer height modifier for thread and 90% grid infil for top catch part.
3 perimeters.
All setup and modifiers are in 3mf files.