Toothpaste Holder - Prusament Upcyling

This is a simple toothpaste holder with Prusament spool used as a frame. The honeycomb design of prusament gives a really nice background to it which enhances the appearance of the holder.

It is very easy to assemble, you will need :
2 x Drywall screws: to secure the spool mount to the wall.
2 x M3 Allen bolts: to secure Paste_holder on a spool (optional)
you can avoid M3 bolts and use glue to secure Paste_holder on a spool.
Refer to photos for details.

Here is the link to prusament spool i printed and used.
https://www.thingiverse.com/thing:3429541/files

Leave a comment for any update in the design.

Print instructions

Print Profile - 0.3mm Draft @MK3

--Updates in the Stock profile--

Recommended -
Plater Tab
-Supports: None
-Infill: 0%
Print Settings - Advanced - Extrusion Width
-First Layer: 0.6

Optional -
Print Settings - Speed
-Perimeters: 60 mm/s
-Infill: 200 mm/s
-Solid Infill: 200mm/s
Printer Settings - Extruder 1 - Retraction
-Lift Z: 0 mm

Assembly Instructions (see photos)
You will need
1 x Spool
1 x paste holder (mini or tall)
1 x paste holder mount
1 x Glue (Any white glue)
2 x Drywall screws
2 x M3 Allen bolts 10mm long (not needed if using glue)

Step1: Secure paste holder mount to the wall.
Step2: Glue the Spool to paste holder mount.
Step3: Glue paste holder to the spool(You can also use M3 fasteners)

Good Job!!
Congratulation!!

You can Support me by making a small donation:

https://www.paypal.me/sharad1209