1 / 2
VersaTrack Bracket for 12mm or 1/2" plywood — image 1
1 / 2

VersaTrack Bracket for 12mm or 1/2" plywood

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Base Bracket for my slew of plates and adapters for the VersaTrack System.

Rating
0 / 5
Likes
7
Downloads
43
Makes
0
Views
387
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Recently added some Craftsman VersaTrack to my shop for my reloading station, but wanted to design something custom to hold the dies, as well as other pieces that I'd like to install on the rack.

Designed these brackets to use ¼-20 socket cap screws to clamp the wood (or 3DP'd) part to maintain a lot of flexibility in the design. 

If you wanted to attach just a piece of wood to them, or design a corresponding part, the locating hole is 9mm from the edge, and I used a .28" hole (~7.1mm) for the bolt to be installed through (see attached image).

Tags