1 / 4
Thin Layer Scraper with Recess for 1/2" x 1/8" (12.75mm x 3mm) Magnet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reworked Thin Layer Scraper with a recess to put a 1/2" x 1/8" (12.75mm x 3mm) round magnet.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 38
- Makes
- 0
- Views
- 493
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I use dry erase magnets on my whiteboard to manage projects for my team. The dry erase magnets are thin though so it takes some scraping with your fingernail to pull them off. I reworked SH's Thin Layers Scraper to add a place to glue a ½" by 1/8" (12.75 mm x 3 mm) magnet so I can place it on the whiteboard, and use it to get under those thin magnets.
Print Settings:
Layer height: .2
Perimeter: 2
Infill: 20% gyroid
Supports: None
Printed with Prusament PETG. (PLA would work just fine too)