Shelly UNI and other electrical components - Build your own Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a collection of holders for electric components to arrange them in your own box.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 75
- Makes
- 0
- Views
- 1,476
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Why?
Most people don't need these, but if you want to arrange some components in your own box, this will help you to save a lot of measurement and test prints to fit them in your box.
List of Components
- Shelly UNI
- Relais
- PWM Controller
How to print
Nozzle: 0.4mm
Height: 0.2mm
Supports: Helpful for the PWM but not necessary
Infill: 15-20%
Brim: no
M3 Screws will fit perfectly.
Note
I lost the orientation during the design process, so please flip them to the direction shown on the images. The bridge for the Shelly UNI should - of course - not be printed in the air but on its own spot on the bed.
Need .stl files? Please leave a comment.