Counting matching models…
Case for HmIP-PCBS2 actor from HomematicIP with relais board installed. Easy to print, no supports needed. You might need to press the clip for the board in with your finger before it moves freely and you can clip in the PCB. One version…
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for PETGSource material: PET
*** You are doing me a big favor by clicking the Like button :-) *** Box for timer relais
Case for the 4channel ESP32 Board with cutouts for access to the screwterminals and GPIO headers. Basic information is written on the lid. -print with PETG -layer hight 0.2mm, no infill Two M3x12 screws are needed.
Build a professional protective housing for your Raspberry Pi 5 with Waveshare 3-Channel Relay HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
Build a professional protective housing for your Raspberry Pi 4 with Waveshare 3-Channel Relay HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
I needed a bracket to mount my Aqara T2 2-Channel Relais module on the Trident, so I made one. Put 2 heatsets into the body, screw the clip to the mount and you are good to go. Contains a small piece of inbuilt support, you can just push…
With the Smart Relay Holder , you can install smart relays such as the Salsus SR600 , DI600 , or Shelly modules neatly and securely inside a Hager meter cabinet . The holder ensures an organized and stable placement of the relays and…
Boîtier pour relais sonoff : https://s.click.aliexpress.com/e/_c3zEuLYT Boîtier à imprimer en 2 pièces. De préférence en PETG ou ASA. Les deux parties s’assemblent avec des vis autotaraudeuses M2,5.
Case for the 4channel ESP32 Board with cutouts for access to the screwterminals and GPIO headers. Basic information is written on the lid. -print with PETG -layer hight 0.2mm, no infill Two M3x12 screws are needed.
This is a bracket for 2 8-channel relay modules. It can be mounted on the standard DIN rail
for the standart 4x Relais (5v) and Buck Converter you can find everywhere.
Mounting Clip for a single Relais 5V. (e.g https://www.amazon.de/AZDelivery-1-Relais-KF-301-Low-Level-Trigger-Arduino/dp/B07V1YQQGL?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=A1X7QLRQH87QA3&th=1 ) Use some screws or merge the base…
I needed a secure mounting of a solid state relais. ( https://www.az-delivery.de/en/products/2-kanal-solid-state-relais ) Fotos show mounting and details. The following screws were used: Relais: M2.5x5 Fastening: M3x10 (self tapping)…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare 3-Channel Relay HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
Build a professional protective housing for your Raspberry Pi 4 with Waveshare 3-Channel Relay HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
Halterung für Blinkerrelais für KFZ ohne eigene Halterung zum fest Verschrauben mittels M6 Schrauben.
Brauchte für mein projekt eine Wand halterung für ein Schalk NR U3 Nachlaufrelais. Und habe mir eine einfache halterung gemacht, die man mit doppelseitigen klebeband an die Wand befästigen kann. gedruckt liegend mit Support
Original made by BoMart123 on thingiverse. Schnurschalter für Shelly Relais Sonoff Mini und Shelly Mini Es handelt sich um ein sehr kompaktes Gehäuse (ca.50x90x20mm) für die WLAN-Relais von Shelly für Lampen und Leuchten oder für andere…
Hutschienenhalterung für eine Relaisplatine "RelGleich3.0" von https://www.nebenuhrsteuerung.de/Relais3.htm Es werden noch benötigt: 6x Mutter M3 2x Schraube M3x14 4x Schraube M3x10
I needed a bracket to mount my Aqara T2 2-Channel Relais module on the Trident, so I made one. Put 2 heatsets into the body, screw the clip to the mount and you are good to go. Contains a small piece of inbuilt support, you can just push…
Wohin mit einem Shelly Plus UNI und einem Relais? In dieses Case passt beides inkl. 4 Fächern, in die je eine 5er-Wago 221 passt oder je zwei 2er 221. Ich habe das Gehäuse so konstruiert, dass die Geräte gut belüftet sind. Die Wandstärke…
Relais-Verbindungsgehäuse für externe Montage Beschreibung: Dieses Erweiterung bietet eine einfache Möglichkeit, Relais-Module zu verbinden, wenn sie nicht mehr in eine Unterverteilerdose passen. Es eignet sich besonders für trockene…
With the Smart Relay Holder , you can install smart relays such as the Salsus SR600 , DI600 , or Shelly modules neatly and securely inside a Hager meter cabinet . The holder ensures an organized and stable placement of the relays and…
Boîtier pour relais sonoff : https://s.click.aliexpress.com/e/_c3zEuLYT Boîtier à imprimer en 2 pièces. De préférence en PETG ou ASA. Les deux parties s’assemblent avec des vis autotaraudeuses M2,5.
Hallo! Das ist ein Gehäuse für das Koppelrelais des Sonoff. Die Halterung passt auf einen Sonoff Basic. Schrauben wurden M3 x 12mm verwendet. Druck: Nozzle 0.5mm Filament PLA Infill: 20% Category: Electronics
Ersatz für den Stopfen/Kabeldurchführung mit der Teilenummer 251971878A. Für die Relaisdose in Volkswagen T3 WBX.
I designed this box to hold a Yizhet 2 Channel Relais Module . I melted 4 M3x4x5 thread inserts into the bottom part to be able to screw on the top. There are 4 holes in each side of the bottom part to fasten the cables with cable ties.…
This is a mount for a Raspberry Pi and a 26x50mm relais for a JGAurora A5 (but it's really generic, as it's a screw based mount for a flat surface). The idea is that the Pi controls the controller board's power using the relais. Warning:…
I made a box to mount on a separate 24V power supply Until now, my 3d printer has been given 12V to the heat bed, so it takes approx. 20 minutes to heat it up to 100 C (while covering it with some insulation on top). After that it…
You are doing me a big favor by clicking the Like button :-) Flash the Sonoff Pow origin with Tasmota. Module can be used as a standalone and can be operated with a browser, but also works with Domoticz. Standalone with the button you can…
Inspired by: https://www.thingiverse.com/thing:5359910
You are doing me a big favor by clicking the Like button :-) Now you can switch witch 1 Sonoff Pow Elite four relais! Flash the Sonoff Pow Elite with Tasmota. You need it: 1 x Sonoff Pow Elite 3 x 1 channel relais module 5 v 3 x Relais 3…
This is a small baseplate for using an ESP8266 together with two single screw sensors such as for Weatherstations, measuring current / voltage and so on plus a relais. The inner diameter of the screwholes is 2.1 mm. Any wood screw around…
small casing for LC-Technology 4 channel relais card. more information: https://templates.blakadder.com
Plug for Bosch Tonfolgerelais / Tonfolgeschalter, just put female 6.3 mm spade terminals in the plug and secure them via a pice of 1.75mm filament, that you stick thru the hole in the side. Currently only for Bosch tonfolgerelais, models…
This is for relais with a hole spacing of 45x21mm. You need a standard Voron clip and use 2x M2x10 self-tapping screws to attach the mount to the clip.
created this Box for a Garage door opener using an ESP D1 Mini Controller and a Relayboard. Stepfile is included to make your own Version. Layer Height: 0,2mm Infill: 30% Material: PLA M3 Heat inserts used for mounting the Boards and the…
A case for an ESP8266 NodeMCU V3 from AZdelivery with Relais. Category: Electronics
This is a box for the sainsmart 2 Relais Module. The exact placement of the standoffs may to be modified, due tue tolerances of the boards. * If this shall be used for voltages above 60V, make sure that all the exposed parts are safe to…
I made this baseplate to fix several 12V Relais together. These relais are used in cars and can handle up to 30A. I use them to switch a 150W heat element and several other things.
Using the USB port on the P1P to power a relay card which can be powered using the original LED light connector. This can then turn on various accessories. In my case, I turn on the LED light. Since I didn't know if the power supply from…
Edit 03.03.2022: Ich habe das Unterteil geringfügig modifiziert und neu hochgeladen: Die Stehbolzen für die Montage des Oberteils mit der Außenwand verbunden, weil mir einer davon angerissen ist. Beschreibung: Ich habe ein kleines Gehäuse…
Once again, a clear note: Do not install these additional LED strips directly on the connection where the original LED strip is connected! The current requirement is too high and you will at least damage the front panel board! v2 (update…
Ich habe hier ein Blinkrelaishalter entworfen um das blinkrelais bei meinem Moped unter dem Tank zu platzieren. Befestigt wird es ganz einfach mit Kabelbindern durch die vorhergesehenen Löcher.
Raspberry PI and Relais Holder DIN Rail 35mm x 7.5mm Holds a Raspberry PI 3 b (other Models may fit too) Holds a Arduino/Raspberry PI Relais Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: No Resolution: 200…
Relaisgehäuse für die Montage an 3D Druckern etc. Passt für gängige Doppelrelaiskarten und die neuen Solid State Relaiskarten. Bohrungen im Deckel sollten mit der Bohrmaschine aufgebohrt und evtl. gesenkt werden, je nach verwendeten…
This is a case/cover for the Yamutec USB-REL4-8A Relais Module . This version (1.6) is a slight modification of the previous Model with the following changes: added holes for LEDs added circular inset at power jumper, so it's easier to…
This is a case/cover for the Yamutec USB-REL4-8A Relais Module . This version (1.5) is an improvement based on my first iteration with improved tolerances. The cover fits accurately around the USB port with about mm of gap on both axis…
Einfaches Gehäuse mit Anschraublaschen für das HLRELM-1 Relais von Berrybase. Das Relaismodul kann mit M3-Schrauben befestigt werden. Optional dazu der Deckel. Diesen am besten mit einer Skalierung auf 99% drucken.
A propper 19" mount for a four channel relais board. Wire the relais to the 9pin d-sub as you like or stay tuned for more instructions. ;-) Use 2.5mm countersunk screws to attach the arms. The board holds with four 3mm screws (Head should…
printing tipps: Please print in PETG or ABS, since PLA may not be stable enough in higher temperatures which may occur adjacent to other electrical devices. transparent material for the lid (top) will let the LEDs shine through.…
This is an enclosure for common optocoupler relays including a snap fit lid
I've need a mount for this three components and i want to share it with u Mounted it with 2 T Nuts on the printer. I added the Fusion 360 File Used print setting: Layerhight: 0.2 mm Infill: 15% Material: ABS Printed on Flashforge…
I do electronic projects for my smart home regularly. This time I'm sharing it with the public. This is a complete project including the schematics, layout for breadboard and a sample code for home-assistant with esp-home. The box…
Die Schrauben für die Platine sind M3x6 und werden direkt in das Plastik geschaubt. Für den Deckel werden M3 Heat inserts verwendet. Die Löcher für AC Kabel haben 8mm ø Das Loch für GPIO Kabel hat 4mm ø
For my solar system I needed a way to mount a 200A automotive relay on a DIN-rail. The clamp isn't spring mounted but held in place by two M4x12 screws and nuts. A bit less convenient to install but it is hopefully a one time operation…
This is a simple housing for a 2-relais module and a LVM2596 voltage converter. There are many almost identical versions of those relais modules, emphasize almost. Mine has tongling as the manufacturer and has the screw holes in a…
Une boite étanche pour un module ESP32 avec alimentation et relais. C’est pour faire une rallonge pilotable par le WiFi. Le boitier est fait pour le circuit X-HX0293A . Ensuite faudra lui installer Tasmota dessus à l’aide d’un usb->port…
This is a quick design for cases to protect my ESP32 relay modules. Change the design in freeCAD if you like. My intention was to print the cases on my small Ender 2 pro. I used an M3 thread insert to screw it in. V2 is for better printing.
Boitier permettant d'intégrer un relais 14 pin avec voyant et bouton de test avec son support de connexion, lien du relais que j'ai utilisé :…
Für das Gehäuse werden folgende dinge benötigt: 1x Tempcontrol_Gehaeuseoberteil 1x Tempcontrol_Gehaeuseunterteil 3x Tempcontrol_drücker M3x20 Senkschrauben Das Board ist hier zu finden https://amzn.to/3AQePA9 Es gibt 2 Versionen vom…
