Soap Dispenser Bottle Head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A soap dispenser bottle head which fit my bottle quite well. 6.54mm inner diameter in Onshape.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 98
- Makes
- 1
- Views
- 991
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- GNU General Public License v2.0
This is a simple soap dispenser bottle head with an inner diameter of 6.54mm in OnShape. It fits my bottle perfectly, I don't know if it will fit yours so measure it up before you print! It takes around 39 minutes to print and uses 4 grams of filament. No supports required. Print it with the top of the bottle head lying on the bed. You can edit the file in OnShape to your liking if you want, just make sure that the tube is connected all the way to the middle part if you alter the dimensions:
Material:
Eryone White PLA
Bed Temp:
60°C
Nozzle Temp:
215°C
Infill Density:
20% Tri-Hexagon
Layer Height:
0.15mm
Print Speed:
45mm/s
Wall Line Count:
3
Z-Hop On
Adhesion Type:
Skirt
No supports required.