Ultimate Prusa Clock mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.42 – €2.96 net (excluding VAT)
For file: Ultimate Time Lapse (1)_0.2mm_PLA_MK3S_2h55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.69 excluding VAT (range midpoint).
- Weight reported by the author
- 29 g
- Print time reported by the author
- 2.91 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Designed to fit the Ultimate Prusa base.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This will hold a 90mm (3.5") clock. It is 25 mm deep. The clock i used came with a is just a hair smaller then 90mm so a dab of super glue with keep it secure. Printed without supports.
Link to the clock I used. https://www.amazon.com/dp/B09G9JYGV4?ref=ppx_yo2ov_dt_b_product_details&th=1
I removed the clear plastic from mine as it was cracked but i think it should still work out as there wouldn't be as much of a glare.