JOSEPH JOSEPH DISH DRYER WATER DRAINER EXTENSION
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.08 – €2.54 net (excluding VAT)
For file: drainer_0.3mm_PETG_MK3S_2h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.31 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 2.04 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An extension for the JJ dish drainer to channel water into the sink.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 79
- Makes
- 0
- Views
- 1,032
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
The JOSEPH JOSEPH dish drainer has a water drainage slide that is unfortunately too short to reach the sink in the house. The faucet's position does not allow the dish drainer to channel water into the sink. I designed a 3d-printed extension that allows the water to flow into the sink. I hope this print was useful. It is an easy but longer print. Happy printing!