Satsana for Ender 3 Micro Swiss with BLTouch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My take on the Satsana duct for an Ender printer using the Micro Swiss direct drive with all metal hotend and BLTouch
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 54
- Makes
- 0
- Views
- 771
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
My version of the Satsana duct using a single 5015 is tailored for the Micro Swiss direct drive and all metal hotend, with an optional mount for a BLTouch on the right side of the duct. This makes it very nice for cable dressing compared to the several left-side mounted versions that are available.
The BLTouch will be directly in line with the nozzle along the x axis, and so there's no Y offset at all. It's at +51.55mm for the X offset.
The height is slightly adjustable so that you can accommodate slightly different nozzle heights while keeping the approximate 3mm distance between the stowed pin height and nozzle face.
Due to access, it's best to mount the BLTouch mount to the duct before mounting the duct to the Micro Swiss carriage, although there's plenty of access for making adjustments with a common L-shaped hex wrench.
Note: you'll want to use an M3 heat set insert for the BLTouch mount. If you've been afraid that heat set inserts are a pain in the neck, just try it. They're great and they'll change how you design things in the future.
And of course, the Fusion 360 and STEP files are included for your remixing pleasure.