1 / 2
GM Keyless Entry Key Fob
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made as a replacement to an old GM Truck Fob. Couldn't find a 3 button version so I made this.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 122
- Makes
- 0
- Views
- 808
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I made the holes small enough to tap m3 threads or you can just use a m2.5 screw without a tap.
The board fits very snug in the rubber, make sure its seated all the way in before putting the back on.
Should be roughly as water proof as the original design, would be fine wet but wouldn't hold up submerged for long.