Counting matching models…
What lay behind this shackle could be more priceless than gold and more meaningful than love. is it magic? Printed in PLA. best success with 15-20 % infill once off the bed pull up on each side of the shackle and release it from the…
I used the handcuff ratchet system as a clamp for another project but then went on to re-purpose the design into this toy handcuff design. That’s why it's keyless and better as a toy. I’m not sure they could restrain anyone for long,…
It is a simple 3d model easy to print in up-right position on standart 0.2 layer height prints in about 1 hour
This is the MiSTer FPGA wedge case to be used with the Teknet 10 keyless keyboard. again check the video for more information.
EDIT: Added a version for printing with flex filament. I printed with Ninjaflex Cheeta with no supports. Needs a little tweaking for a perfect fit but has been on the wife's fob for a few weeks. Thin Sleeve to protect your keyless remote.…
My first 3D model This is a case for the Corvette C4 Keyless Remote System. Since the original housing is slowly crumbl
I was inspired by the SiCK-68 but wanted a tenkeyless layout, so I designed it from scratch. Here are some other features I added in my design: Case holds plate at a slight incline Threaded inserts are used for the case-closing screws…
I realized that my car (Swift Sport) was missing this cover. So I created one. ABS mandatory. ASA for long lasting result (UV resistant). I should be compatible with any Suzuki model from this era and this specific keyless system.
Two vesions of handle for Yato yt-04645 keyless drill chuck . To assemble two M3x18 mm socket head screws are needed and two M3 nylon lock nuts. Screws holds chuck in position. Material: PLA, PET-G, etc Infill: at least 30% Layer high:…
Handle for keyless drill chuck 0,3-3mm hex 1/4" shaft To secure chuck in handle 2x M3x10mm socket head screws are needed. Holes for M3 screw should be tappered by M3 tap before screws are inserted. Material: PLA, PET-G etc. Layer high:…
I designed this snap-fit keyless entry housing for a 2002 Ford Explorer Sport Trac after my step-son broke his. It prints well without supports and snaps together well. Super glue can be used to make it more permanent.
Based on the great model from leejsmith, this one is customized for the Keychron K8 keyboard and adds a Zaparoo reader. It needs printing supports for the card reader interior. It includes also an option without card reader. Update 2025 :…
Handle for keyless drill chuck 0,3-3mm hex 1/4" shaft To secure chuck in handle M2,5x8 countersink screw is needed. Material: PLA, PET-G, etc. Layer high: 0,2 or lower Supports are needed under the shaft hole.
I need cover for blade from standrat remote control for Mazda 6 keyless. There is a hole for immobilizer chip and the blade is holding by stick (hole on the picture. Bouth sides haves shape for finger holding.
Keyless drill chuck with JT33 to R8 adapter taper affixed.
½ inch Keyless drill chuck caddy with R8
I need cover for blade from standrat remote control for Mazda 6 keyless. There is a hole for immobilizer chip and the blade is holding by stick (hole on the picture. Bouth sides haves shape for finger holding.
The palm rest is split in 2 halves to be printed on a regular hobbyist printer. In order to assemble it, some gluing is required. Just pour some hot glue (or similar) into the holes and then push the 2 halves together. Supports are…
MK2.5S ABS 0.2mm 30% Linear advance 2-13mm Keyless Chuck with 1/2' SDS Adapter High Performance Detachable Keyless Conversion Tool for SDS, GSB and GSR 1 x CHC DIN 912 M4 x 10 screws 1 X square nut M4
The garage keyless entry battery cover was created by using Creality CR-Lizard Scanner on the original cover plate. I printed this using a resin printer to get a fine form and fit.
Bought a new Honda Forza (2022) and needed a key cover to keep it intact. Printed with 92A Shore TPU, printed with 0.6 mm nozzle on the photos. Also sorry for my poor TPU printing skills.
I made the holes small enough to tap m3 threads or you can just use a m2.5 screw without a tap. The board fits very snug in the rubber, make sure its seated all the way in before putting the back on. Should be roughly as water proof as…
Needed a keyless cam lock, so I made one, maybe you will find it usefull. I used the v2 arm so it fits tight for 5mm panel. Instalattion: drill a 12mm hole and file a small notch so the screw-housing wont rotate, for threadlocking the…
A thing to hold my drill(s) when in use and also for storage. Attach with screws for permanent locations or use zip ties temporarily. Sized for Jacobs 500 Series keyless chuck on a Makita LXT drill but fits others as well. Tested to work…
NOTE: This will only work on drills where there is a mechanism to lock the spindle from moving so that you can turn the chuck independently. Made and tested for YAGSUW Hand Drill https://a.co/d/5qevP3X Also can be found under the search…
I created this spacer and cover to account for the spacing needed to make this gate lock work, and to help mitigate the infiltration of water through the top cracks of the device. I am sharing the .STEP file so that you can cut/extend the…
This is a durable, screwless, 8th Generation Honda Civic k eyless key-fob. I've specifically came up with this design to prevent the enclosure from splitting. Mind you, this is a very tight, snug-fitting keyfob. DON'T FORGET TO ADD A NEW…
