1 / 3
Keyless cam lock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed a keyless cam lock, so I made one, maybe you will find it usefull.
I used the v2 arm so it fits tight for 5mm panel.
Instalattion: drill a 12mm hole and file a small notch so the screw-housing wont rotate, for threadlocking the lever, use superglue if necessary.
Printed using PLA+ with 0.25mm layer height, 30% infill, 6 vertical and horizontal layers.