1 / 7
Handheld Painter Tape Dispenser 50mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small and easy to print handheld tape dispenser (hardware required).
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 107
- Makes
- 0
- Views
- 1,352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a small yet effective tape dispenser with interchangable 3d printed blade suitibale for 50mm tape.
I suggest to print this model without support and, if your bed adesion allows it, without brim.
Once printed the four holes for the m5 screws will be covered by one layer of plastic (this layer is there for ease of printing)that you can easily remove it by using a 5.5 mm drill bit or with an exacto knife.
Hardware required for assembly:
- 2x M5x65 screws
- 2x M5 nuts
- 4x 5.5x9.5mm washers
Edit 09/03/2023:
Added V3.1 MainBody and Sideplate that can accomodate larger roll of tape