100x20 mm Spring Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a spring guide for a spring with an outer diameter of 20 mm, a thickness of 1.5 mm and a length of 100 mm.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 1
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a spring guide part for a 100 mm long spring with an OD of 20 mm. Please note that after installing the guide, the spring inside is compressed to become 75 mm in length, so be careful when designing assemblies that use this part. The part does not need any supports or extra parts. Simply print the two parts (outer and inner), align the thicker end of the inner part with the openings on the outer part and press down with the spring inside. After applying some force and pushing the part until it moves freely, it locks in place and does not come out.
Supports: No
Material: PLA
Layer Height: 0.16/0.2
Infill: %100