Box for Smart Home Bridges
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One to accommodate them all. Philips Hue, Taco and Bosch Smart Home Controller (including cables)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 365
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Motivation
All smart home bridges in one place was the goal of this project. At the same time, as little cable clutter as possible.
There are 2 versions for the floor. Depending on the mounting on the wall choose one of these versions
- Tado horizontal -> no matter
- Tado vertical -> choose the variant where the stopper points to the floor
As orientation, on my pictures you can see that I printed the wrong one ;)
Well, at least it was the only version at the time ^^
Hint:
Put the cables on the Bosch BEFORE clicking it on the Plate. It hard to get it off again without breaking the snap-in-pin. Use something flat to push back the pin before lifting the Bosch SHC.
Warning:
The current version fits on the Bambulab X1 Buildplate but NOT on my Prusa MK3S. Cut and glue or let me know if I should try to optimize the size. At the moment I don't know if this project is interesting for a few more people.
Housing for
Philips Hue
Tado
Bosch Smart Home Controller
How to print
Nozzle: 0.4mm
Height: 0.2mm
Supports: helpful but not necessary
What you need
Some M3 Screws and Nuts
For the Hue mount I got inspired by this
https://www.printables.com/model/125408-philips-hue-bridge-rack-mount