1 / 2
X1 Main Board 60mm Fan Duct Upgrade — image 1
1 / 2

X1 Main Board 60mm Fan Duct Upgrade

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows the X1 main board cooling fan to be upgraded to a 60mm fan.

Rating
5 / 5
Likes
9
Downloads
32
Makes
1
Views
382
Reviews
1

Updated at source:

Model information

License
Creative Commons — Public Domain

While replacing the main board cooling fan in my X1 Carbon, I learned there was enough space to upgrade the fan to a 60x25mm fan. I created these models to achieve this.

There are two models. Both insert over the heat sink on the main board and have a path to direct air over the fin stack.  One has a an additional opening to direct air over the capacitors on the board. I don't think the capacitor cooling is necessary, but if you want to be safe it's not a bad option.

I haven't been able to print this without supports, and suggest you use them. This should be printed with a 0.4mm nozzle. Layer height is up to you, but the higher the resolution you use the better the chamfer I added to aid the insertion onto the heat sink will come out.

I used the Noctua NF-A6x25 5V PWM fan, but any 60mm 5 volt fan should do fine.

Additionally if you don't feel up to creating a new wiring harness you can use this other model I created to relocate the stock fan to above the heatsink.

Tags