MK3S Filament Dryer Shelf System - Sovol 3D
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small shelf for the MK3S to support the Sovol 3D filament dryer while printing. Shelf can be modded to fit other devices
- Rating
- 4.8 / 5
- Likes
- 46
- Downloads
- 259
- Makes
- 5
- Views
- 3,109
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I live in a super humid climate so I need to be actively drying while printing. I didn't want my spools of filament exposed to the moist air for hours at a time while printing. So, I got a dryer I could print from but I couldn't figure out where to put it and still be able to print and dry simultaneously. And so, the filament dryer shelf system was born!
There may be others out there but I couldn't find them so I made my own. It consists of 3 brackets that fit the top rail of the MK3S snugly - a left, right and center. Also, there is the shelf with small cut-outs for the feet of the Sovol 3D dryer so it doesn't slide around. This could easily be modded to adjust the width of the shelf for other models or devices you may need up there.
I printed it with Fusion Filaments HTPLA Carbon Black to make it a bit flexible but still sturdy. If you don't have that then PETG would probably be the best choice as I think PLA might snap when attaching the brackets.
The filament guides in the photo aren't mine and there are lots of them on this site.
If you try it out let me know how it goes. It was a fairly long print all in, so I didn't refine the tolerances to perfection. Still, I was able to make it work for me but if I need to change something I can. Enjoy.