The army painter color sample card
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a quick design I made for my wife.
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 182
- Makes
- 5
- Views
- 1,773
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a quick design I made for my wife. She got the army painter mega paint set and wanted to see how the colors would look on a printed surface. the color card fits all of the army painters colors (and some extra) and is modeled after their paper color card.
Just for fun i modeled a version that has a offset so you could stack the plates infinitely together to form a hex grid.
Print instructions
I printed it in PETG but other filaments should work fine.
When using PETG be mindful of the PEI build plate, I have read that with some of the build plates PETG sticks so hard it will ruin your build plate if a separating layer is not used. i have never had issues with my build plate and PETG, prints always come off when the plate cools down (original MK3 build plate)
Layer height:
0,3 mm
Settings:
Prusament PETG (optional brim to keep corners down)
Printer:
MK3S