Toilet paper holder - cloud shape

This is a toilet paper holder with a shape inspired by a cloud.
For space reasons it isn't so big, so it can accomodate only 4 full size rolls and one more reduced size roll.
Due to my 3d printer build plate, I divided the box into three parts.
I printed the box using a build plate of 210 x 210 mm (Flying Bear Ghost 5). For the height 10 cm is enough.
If you prefer to see the paper roll on the top-right side more in center, it is possible to integrate the holder with a support.
The support will hold the top roll about 1 cm above the 3 baseline rolls.

The 3 parts have 2 joints on each side so they can stick together.
To hang it on the wall I used 3 hooks for countersunk screws.

I added the possibility to close the toilet roll hole with a cap. Then you can decorate the cap, for example with a drop.
The cap can be fixed in the hole using 5 curved strips. Each strip has a L-shaped attachment for the corresponding hole in the cap.
The strips are of two shape: a shape for small toilet rolls and a shape for larger toilet rolls.
Strips with narrow curvature have a diameters of max 40 mm.
Strips with wider curvature have a diameters of max 47 mm.

Then I created drops of 3 sizes.
Drops can be glued to the cap.

PRINT INSTRUCTIONS

You can use PLA. The position of the parts doesn't require supports. To leave the object as light as possible I suggest to use an infill of 5%.