PUG (Parametric umbilical gland)

Looking for mounts for PUG ?

Thanks to all users who create mods to run PUG on their machines.

If you've designed a mount for PUG that isn't listed below, contact me and I'll add it. 

Alternate PUG:
 

Toolhead :

V2.4 Gantry :

Trident A drive :

Exhaust grill :

 Umbilical Z for 2.4:

Others:

Changelog

The PUG

PUG stands for Parametric (or Printed) Umbilical (or Universal) Gland ^^.

I use PUG to replace PG7 on my printer. Why ?

• It suits cables from 4.5mm to 10mm in diameter.

• it is easy to print and re-print, ...

• it allows to easily remove the cable (no need to cut or de-pin)

How to print it ?

ABS/ASA (not filled), no support, 4 perimeters, 5 top/bottom layers, 40% infill. Print a bit hotter than usual (+5°c)

If you plan to use it in unenclosed printer, you could consider PETG or TPU for better layer adhesion.

Is it reliable ?

I have no issue with the current version. To ensure reliabity, print hot enough to avoid delamination. Avoid filled filament CF or GF

Don't want to use Ziptie ?

Two "screws" version exists

• One piece : print twice the same piece, screws are at opposite sides

• Two piece : print 2 different pieces, screws are one sided.

Bill of Materials