NSG Splatmaster Linkage Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My original linkage arm on my NSG splatmaster snapped in half so I decided to design up a replacement piece.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My original linkage arm on my NSG splatmaster snapped in half so I decided to design up a replacement piece.
Print Settings
Rafts:
No
Supports:
No
Resolution:
.12 MAXIMUM
Infill:
20%
Filament:
PLA is fine, PETG or Nylon recommended
Notes:
Print with 10 or more walls.
Post-Printing
You will need 2 M2x4 bolts to reinforce the 2 barrel connector nubs.
Put the spring onto the linkage arm with the plastic detent ball in the barrel and connect the 2 together (might be a little tight depending on printer tolerances)
Category: Sport & Outdoors