Garmin 55 Dashcam Holder for Chevrolt Volt
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is simple dashcam holder, which clamps around the rear-view mirror on a Chevrolet Volt (tested on a Gen1 2015…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 59
- Makes
- 0
- Views
- 980
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is simple dashcam holder, which clamps around the rear-view mirror on a Chevrolet Volt (tested on a Gen1 2015 model) and is compatible with the ball-and-socket joint of a Garmin 55 dashcam.
The clamp has to be printed with a flexible material (here: Orange TPU), the holder can be printed with pretty much anything, perhaps ABS or PETG for improved heat resistance - cars can get hot.
A few 8x2mm magnets (ideally: 8) snap both the clamp and the holder together. Make sure the magnets are oriented correctly when assembling.
Print instructions
Clamp: flexible material. PTU, 15% infill, 0.2mm resolution.
Holder: PETG, 15-25% infill, 0.1mm resolution.