Garmin 55 Dashcam Holder for Chevrolt Volt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is simple dashcam holder, which clamps around the rear-view mirror on a Chevrolet Volt (tested on a Gen1 2015…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 980
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is simple dashcam holder, which clamps around the rear-view mirror on a Chevrolet Volt (tested on a Gen1 2015 model) and is compatible with the ball-and-socket joint of a Garmin 55 dashcam.
The clamp has to be printed with a flexible material (here: Orange TPU), the holder can be printed with pretty much anything, perhaps ABS or PETG for improved heat resistance - cars can get hot.
A few 8x2mm magnets (ideally: 8) snap both the clamp and the holder together. Make sure the magnets are oriented correctly when assembling.
Print instructions
Clamp: flexible material. PTU, 15% infill, 0.2mm resolution.
Holder: PETG, 15-25% infill, 0.1mm resolution.