Mini Monster Truck | Toy Car

This monster truck / pickup is easy to print and assemble and very sturdy.

It's actual suspension is a mechanical integre part and fully functional.

Printing Recommendations:
Screws:                              0.15 layer-height, 5 walls, 30% infill (you want them sturdy)
Body / Wheels / Base:    0.15 layer-height, 3 walls, 20 % infill

Tipp: Print the base from transparent filament for a subtle look.

Tipp: If the screws are difficult to screw in, you might want to deburr the base's holes or use the wrench.stl I designed.

Combine different colours or multicolor parts for exeptional cool trucks and show off your make :-)

For example wheels with a color-accent rim:

Or combine different screw- and body-colors for custom looks!:

Happy Printing!

Remix Documentation:

I remixed the great base version of this model and modified most of the parts to different extend.

For example the supension model has undergone an iterative improvement to make it even fit better and provide more flex than the base version. I modified and reprinted it several times for this purpose.

Down below is a picture of the final result including

+ adapted front and back axle housing and 

+ a more flexible suspension part as well as 

+ removed bed adhesion pads and 

+ cleaned up surface artifacts / thin walls.
 

Also I designed a wrench for the screws off the scratch and iterated to its final form.

Assembly of 4 screws now has a much wider brim and one screw has been separated in order to be printed as a spare part or just a single replacement print.

Also I created a right and left side version of the wheels. 
The base design didn't distinguish the sides.

Update 2023_03_01: Thanks to much appreciated comments I repaired the left wheel 
(had a gap).