FLSUN QQ-S Pro ADXL345 accelerometer mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Accelerometer mount for QQ-S Pro to be used with klipper. May work with FLSun Q5
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 40
- Makes
- 0
- Views
- 583
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
From Thingiverse:
Couldn't find any plug and play ADXL345 holder, so i designed my own. It's designed to be used in place of the stock probe, so the only additional thing you need (obviously other than the adxl345 itself) it's a neodymium magnt 20x10, which can be temporarily unscrewed from the probe, and a couple of screw. However, i suggest to buy a second magnet to avoid wear on the probe screw hole.
This design comes in 2 variants:
- Generic ADXL345 pcb (GY-291 module), which is the one i had and personally tested
- Genuine Adafruit ADXL345 module, which i couldn't test.
The Adafruit one has been realized using the official datasheet, so dimensions should be fine, but again, i can't assure.
if you have the GY-291 generic module, you will need standard m3 screws, if you have the Adafruit one, I'm not sure, but i suppose you will need M2.5 ones.
The mount has been tested with great results on Klipper's resonance test.