Simple BLTouch Mounting Jig for Geeetech A10
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To mount the BLTouch on the A10 you need to hold it perpendicular and keep the exact distance of the pin to the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 47
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
To mount the BLTouch on the A10 you need to hold it perpendicular and keep the exact distance of the pin to the printbed while tightenig the bolts of the holder. Since I found this to be annoying, I made this simple jig.
Just mount the BLTouch to the holder then unloose the bolts between theholder and the carriage, then place the jig underneath the holder. Slide the jig a bit to the left to tighten the right bolt, then slide it to the right to tighten the left bolt. Now the BLTouch should be mounted perpendicular and with the right distance of 4mm to the printbed.
Category: 3D Printing