Counting matching models…
The cheap insect screens are mounted with only a Velcro strip. It is helpful to use such a tool, with which the net can be pressed into the nubs of the Velcro strip. CAD Design…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
I wanted a top spool mount for printing TPU, but so many I found were big, bulky and looked like permanent installations. I designed this to be easily slid on and off the top chasis of the K1 and K1C. There is enough clearance from the…
Flooring Spacer for Installation of Laminate/Vinyl/Wood. For 1/4” & 1/2” Gap. Designed to stay in place
This is an easy-to-install version of Tesla Model Y's 2nd row seatbelt guide. You just need to snap it onto the head rest rods without the need to take them out (which isn't straightforward if you don't know how). I also found the…
Do you love Gridfinity? Do you love magnets? Do you hate installing magnets into your Gridfinity bins? Well, you aren't alone. I've always found it to be a particularly fiddly process to make sure you have the right polarity and to keep…
Raspberry Pi Zero 10" Rack Mount Bracket Panel - Staffa installazione Pi Zero rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col Update: 06/02/2025 added resized model…
I needed a way to mount a wooden dowel through the face of a panel. This design uses a compression collet to grip the shaft and hold it in place. Printed with .2mm layer heights & 30% infill. Category: Household
Printing : Print 1x main body and left/right side. Print 2x side clip for each additional layer. Print 4x strap per layer (works for me) No supports. .2mm layer height Quality defaults How to use Determine how many levels you will need by…
Raspberry Pi3- Pi4- Pi5 10" Rack Mount Bracket Panel 2U - Staffa installazione Raspberry PI 3-4-5 rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col Update: Added versions…
To complete the model following parts are needed: 4x led white 3528 2x Led red 0805 4x SMD Resistor 1K5 1206 1x esu 51968 or LaisDcc 860042 2x M2x4
I wanted to make a bed knob that didn't need to use a soldering iron to install and get rid of the last red parts on my printer. Below are the steps you take to install and also I've posted some pictures for reference. 1. Print the knobs…
Summary: This model is an addon for a Cartographer installation, e.g. like my model version 2 of the mount and shroud that can be found here. https://www.printables.com/model/1277242-k2-plus-cartographer-mount-and-shroud-custom-pcb-p I…
Arduino UNO 10" Rack Mount Bracket Panel 2U - Staffa installazione Arduino UNO rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025 Update: added resized models…
I had issues with installing remote topcap on my Fox Later i found manual how to do it (https://tech.ridefox.com/bike/service-procedures/851/2018-fit4-remote-topcap-interface-part-installation), and Fox recommended to use special tool…
A 3d model of a jet bridge for 3d printing at small size. Can be installed into cardboard or other material. Compatible with most narrow-body and wide-body aircraft.
Either modify an existing printed part, or print this model with standard RatRig printed part settings and recommended materials. It's really easy to modify an existing part and likely has negligible structural impact. Modifying an…
tg73 have a very good instruction https://www.printables.com/model/943447-v-core-4-toolhead-easyfit-mod-removeinstall-the-to
English: Prusa MMU3 Straight PTFE Tube Adapter with PC4-M6 Push Fittings 📹 Video link: https://www.facebook.com/100000655244863/videos/pcb.5323751667850647/1730651454805405 Description After many hours of printing with the Prusa MMU3, I…
I use this cool shelf bracket to hold my shelf up. It is quite strong and make sure the infill is sufficient.
Im Baumarkt hab' ich kein solches gefunden, deshalb hab ich selbst eins entworfen, vielleicht hat ja noch jemand Verwendung dafür. Manchmal reicht ein Element um sein Schalttechnisches Ziel zu erreichen. Einfach ein Stück Hutschiene (max…
6-1-2020 Updated to version 3.0. Previous design was generated from the original mesh and had a few issues that made it not workable for updates. This version is a complete redraw as a solid model but retaining all the same features. Per…
Print with transparent petg filament. Temperature max 220 degrees. Slow feed. Led WS2812B COB - 160Leds, 5mm PCB…
Features of my interpretation of a portable electroinstallation level: Horizontal and vertical level 6 mm center rod for drill guiding 6 mm reinforced drill guides with distance marking 71 mm and 142 mm distance from center rod for 2 x…
Excuse the color variations in the plastic
According to the Micron R1 CAD, the distance from the front of the bed to the back of the extrusion should be 23 mm. Photo courtesy of @xx_maverick_xx on Discord
Hold your split loom installation tools in one convenient holder! Screw holes on the bottom and back allow for fastening to a vertical or horizontal surface. Designed around the Electriduct split loom installation tools, but others may fit.
BMW in their infinite wisdom doesn't include any kind of template for installing badges on their cars, just some written instructions and measurements on the TIS that are a nightmare to layout accurately on the car. I wasn't going to do…
70mm-diameter-hook for isolated heating-installation-tubes to hang up stuff to dry 70mm-Durchmesser-Haken für isolierte Heizungsrohre im Heizungsraum zum aufhängen von Dingen
UPDATE: A working print head mount is now posted. My original was too high and would not home successfully. And Valerie Moore did a nice cleanup job on that if you are a perfectionist and want the nicest looking hidden surfaces! I have…
Tool to install front seal to Mopar TorqueFlite 727 transmission while transmission is not disassembled. Printed in PLA
Arduino UNO 10" Rack Mount Bracket Panel 2U - Staffa installazione Arduino UNO rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025 Update: added resized models…
Upgrade my ender 3 to base Boron and Klipper and the screen in the botton was not helpful when put the enclosure
Raspberry Pi Zero DIN RAIL Mount Bracket - Staffa installazione Pi Zero su barra DIN 7.5mm Suitable for: DIN RAIL 7.5mm IEC/EN 60715 TH 35 - 7,5 https://www.printables.com/model/885933-desktop-din-rail-stand-7590-degrees-supporto-barra…
edited parts: BL - Outside Door Block V4 - tested on my enclosure with mk4s BL - Long Outside Door Block V4 - not tested yet Printed with PETG. 0.4 nozzle, 0.25mm Layer For better seal of the plexiglass to the enclosure, i did put m3…
Englisch: A practical tool designed for effortlessly installing percussion caps. I use it specifically for my 1081 caps. Unfortunately, the ones I found didn’t fit, so I created my own. Deutsch: Ein praktisches Werkzeug zum mühelosen…
Width: 120 mm Height: 120 mm Depth: 200 mm Electrical Installation Box for Insulation This electrical installation box is designed for mounting in insulated building facades. It ensures the safe housing of electrical components such as…
Door Frame and Bolts with more clearance for easier installation. In door frame i cut the slides a little bit and alt the bolts I made the space in the slides bigger.
Models from the YouTube video, "8 color printing on the Neptune 4 Max (part 1)", for installing CoPrint's KCM Set on the Neptune 4 series of printers. https://youtu.be/HRHlSdWBTfk CX-I extruder mount versions: Version A: All M4 hardware…
I printed them with 100% infill using PLA. I froze the bearings/seal and warmed the jet pump housing in my kitchen oven at 200F. Then I used a dead blow plastic mallet to pound them in. Tools are still in great shape and show no…
The Magnet Guide Stick is a practical tool for safely and accurately installing magnets without mixing up polarities. It works by using an internal magnet on a slider mechanism, controlled with your thumb. Pressing the thumb knob moves…
Shelly BLU Motion Wall Mount Bracket - Supporto installazione a muro Hardware: 2 pcs Screw and wall plug as per assembly requirements Suitable for: ShellyBLU Motion smart Bluetooth motion detection sensor…
🇩🇪 Beschreibung Ich hatte immer Probleme die Bremsklötze von Magura Felgenbremsen in allen Dimensionen korrekt auszurichten (vermutlich eine Frage der Übung …) Mit dieser Lehre ist die Montage ziemlich einfach: Die beiden Schablonen…
Easy way to align your nocks to the right position for maximum accuracy. If you hit your own arrows as a consequence, you also might need a suiting nock extractor at some point. Also check out the Ultimate Archery Companion . Printing is…
A spacer plate to feed the 5-pole high-voltage cable for the stove in the kitchen into the wall cavity. This eliminates the need to break through the wall to get the cable under the frame of the box.
My son was refitting his kitchen with units purchased from diy-kitchens.com and - due to an error - found that he had to replace one cabinet that was already under the new work surface. The length of the supplied legs and the combination…
I made pandel 's remix of the Ribber for our highly modified version of JeepingJohnny 's Circular Sock Machine. I wanted a tool to help with the installation and removal of the ribber cylinders so that if my wife wanted to change out the…
Your all-in-one holder for organisation and quick access to replacement nocks including helpful tools. Everything you need together in one system. Easy accessible - everytime. This companion is perfect for: Easy storage Quick access…
Universal drain plug for rough installation It keeps the smell out. Fits DN50, DN40, DN32
Abschlusskappe für ein standart Elektrorohr mit 20 oder 25mm Außendurchmesser mit einem einem eingezogenen 4mm oder 5mm Kabel. Zum Drucken die beiden Teile mit einem leichten Abstand platzieren. und nachdem das Kabel eingezogen ist, aber…
Cover up electrical holes in the wall or roof. It's 130mm tall and just over 75mm wide.
I recreated the model from Snowstorm to fit it my 12mm sensor, I re-used the buttons.
Forked from original 13mm to 8mm model. Printed without supports. PLA works great.
Adapter for New LCD 7.0 inch V19 for DIY 48V LiFePO4 Battery Case with JK 16S 200A Smart BMS 51.2V DIY Kits BT LCD 2A Active Balancer Case Assemble Box which has 4.3 inch hole from aliexpress.
A 3d model of a jet bridge for 3d printing at small size. Can be installed into cardboard or other material. Compatible with most narrow-body and wide-body aircraft.
Make precise door installation easier with these practical brackets. This small tool allows you to quickly and evenly al
Helper tool for minax knobs. You can use this simple tool as driver Remixed model: https://cults3d.com/:428417 Two pins were added instead of holes and a hole to screw/unscrew the male end. Print handle down, supports optional.
Printing settings: Material ABS or similar non susceptible to fuel material. 20 % infill, Gyroid (Optional) 6 walls, 5 bottoms, 5 top layers. (Optional) Yellows boxis in first picture is a Modifier, so the area around socket hole is with…
Copy of an installation box used for electrical installations in Europe. It has extra space at the bottom for smart switches or similar devices. The reason I created this model is that it can become part of larger models such as display…
Fit the front piece over the belts by pinching the belts together, then slide the back piece behind the belts, into the front piece. Use M3 x 25 screws (or 30 mm with the provided shim) to attach the clamp to the linear rail mounting…
I quickly modified FarlesBarkle's design to be able to mount the adapter plate to the bottom side of CUBE handlebar mount. In this case it can be used to install a light upside-down, while on the top the garmin can stay in its place.…
Hold your split loom installation tools in one convenient holder! Screw holes on the bottom and back allow for fastening to a vertical or horizontal surface. Designed around the Electriduct split loom installation tools, but others may fit.
Using Brad Bauer's door handle facia as a base for dimensions, all I did was slim it down slightly, and add 1.9mm tabs all around. This was all done in the slicer so don't come for me! lol Note, I test fit this on my own Fisker Ocean…
This is a Installation guide if you dont need the base plates.
Small tool to save your fingers from hurting installing silicone tips on dishwasher dividers. Get the tip started on the peg, then put tool over and push all the way down. Saves your fingers and Tips used -…
A set of fasteners for installing the FilaPartner E1 dryer on a thermo-box.
According to the Micron R1 CAD, the distance from the front of the bed to the back of the extrusion should be 23 mm. Photo courtesy of @xx_maverick_xx on Discord
A laser friendly installation template for the Ikea handle, for installing multiple handles at the exact same position. Requirements - Laser level - Self Centering drill bit - 5 mm Drill bit Instructions Set the laser height to the…
Simple hex spanner for affixing a faucet to a sink that works in narrow spaces. I provide several sizes. However, if you need different dimensions, ask nicely, or use the FreeCAD file to change the parameters and generate one yourself. I…
This is a light duty (~18 lb./8.2 kg pull force) magnetic hanger or eyelet, with an included extension pole adapter tool that fits standard ¾ x 5 ACME attachments (window washer, painter accessories). Its purpose is to provide a temporary…
Edit 21.4.2024 I created snap on lock for this press tool. Sometimes it slipped away without it. I find this also a lot of help when installing tight tires, you could just press and lock other side in rim and just install one side with…
Dieser Griff ist für die Elektro-Installationszange 13 86 200 konzipiert und kann aus regulärem PLA oder TPU gedruckt werden. Die Griffhüllen werden einfach auf die Zangenschenkel aufgeschoben und festgepresst. Hierfür benötigt man ein…
This is a template that can be used when mounting the Vinyl Roll Holder and give it a 2 inch spacing. Speeds up installation time, keeping the mounts level and in line with each other.
During print of the orginal model the box machanics often did not come out as expected or brakes during assembly.
This oil seal installer helps to evenly drive oil seals into place. This one has a 60mm depth to help clear the shaft. You can also run a bolt and a washer through the center to help apply even pressure to the seal. This exactly fits:…
Use the short wedge to push the striker cylinder nub inwards, and the long wedge to push the nub downwards. The other part is used for reinstallation of the striker and backplate. See…
A remix of the Dyson Accessory Wall Bracket for 3-tools. I had issues with installing my screws in the original design, and I thought the screw size that fit was a bit too small. Most consumer install kits come with #8 screws, so I…
This oil seal installer helps to evenly drive oil seals into place. There are three lengths here to help clear the shaft. You can also run a bolt through the center to help apply even pressure to the seal. This exactly fits: Toyota Type T…
I didn't like any of the edge spacers that I found for installing my new Luxury Vinyl Plank flooring, so I designed my own. I included a large flat edge for the wall side to help be stable against old imperfect drywall, and a tail at the…
il faut 4 inserts , 4 vis 3x10 , 4 vis 3x12 et 4 écrous et rondelles de 3mm j'ai utilisé une prise coudé pour alimenter la drybox…
This 3D-printed sliding door track system includes a male and female part that interlock, allowing you to mount a sliding door in a floating style. Ideal for creating a sleek, modern look with a seamless installation process. The design…
A tool I designed to be used with a mallet or dead-blow hammer to install the rear transfer-case output shaft seal. I printed it in PETG with 4 sidewalls, 40 % gyroid infill. Printed with a 0.4 nozzle 0.2 layer height.
Just a PVC Elbow Holder for exterior tap Installation, you will need 4 Expanders with screws to mount to the wall. It should fit any cold water 1/2 pvc elbow (as is standard)
When screwing in the screws for the first time, a lot of effort may be required, after several times they will spin freely
One more variation, this use has a tool that can help you get in those hard to reach places. It also has a cap (if it will fit) to keep thing tidy. Category: Parts
Went ahead and redesigned this to be more installer friendly by adding an indentation for your finger. Category: Parts
This tool is for the Govee Permanent Outdoor Lights Pro installation. It is an installation tool for VisualReversal 's (Printables website) friction grip mounting brackets. It mounts them at a Govee-recommended distance of 8 cm or 3-1/4…
I just rotated the nut hole 30 degrees for easier printing
when installing new dust seals in Fox 40 Fork use this tool to perfectly align them. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Hand Tools
when installing new dust seals in Fox 36 Fork use this tool to perfectly align them. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Hand Tools
70mm-diameter-hook for isolated heating-installation-tubes to hang up stuff to dry 70mm-Durchmesser-Haken für isolierte Heizungsrohre im Heizungsraum zum aufhängen von Dingen
I printed the original design by MarekZCMB and then found that because I have the R1 version of the Z endstop mount, I would need to disassemble about half of the printer to replace it I decided to remix it as a cover only, no disassembly…
Some another clutch tips: TD5POWERSLAVE is really good for long travels. Pedal is much softer. On some LH cars is clutch pressure sensor on the right side. It is possible to mount this sensor directly to unused hole inside of a main…
the design is too flimsy in one direction! protection against bending of wires for the zalman s2 computer case when installed "back to the wall", 3mm bolt, 18mm distance between screwdrivers. attention: this model easy broken, need review
I am not sure what to call this model as it is 2 makes and a remix. But I wanted to show the model as a whole in one place, so, A nod to the following two models used to produce my end product as well as remix of the “ESP32 Cam Holder”…
"Bambulab P1S Poop Chute" ( https://www.printables.com/model/562746-bambulab-p1s-poop-chute/comments ) - великолепное изобретение, сочетающее в себе эстетику и функциональность. Но так как он находится на задней стороне принтера, его не…
Cat Gate, Dog Gate, Pet Gate non-marring**, reversible installation and/or easily removable* Easily removable pet gate for hallways or stairs, stops animals going places you don't want them to go. Attaches to walls using non-marring,…
I got tired of accidentally gluing magnets in backwards… This is a quick and simple tool that you can use to insert magnets into your projects and help ensure you are adding the magnets in the correct orientation. Use the ‘A’ tool to pick…
My own IKEA SAMLA 22L Box Filament Spoolholder for a 25mm Installationtube. It's printable without Support. UPDATE 17.02.2019: added a 3mf file for own modifications. Print instructions Category: 3D Printer Accessories Print Settings…
Print with ABS or other high temp filament. I printed with tree support without issue. Step files included since they are a remix of Sunlu's release. Included the PDF from Sunlu as well for some direction. The covers can be removed by…
Adapters to install ebb36 on Ebb42 mounts for Vcore(Ratrig)
