Anker Power Bank Charging station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will fit and charge Anker Powerbank models "Anker PowerCore Slim 10000 PD" or "Anker Power Bank, PowerCore Slim…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 29
- Makes
- 0
- Views
- 810
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
This will fit and charge Anker Powerbank models "Anker PowerCore Slim 10000 PD" or "Anker Power Bank, PowerCore Slim 10000". The charging base is designed for a "Anker 40W/8A 5-Port USB Charger PowerPort 5". All of the scad files are included and can be easily modified to fit other models (no, I won't do it for you; please don't ask).
Print the powerbank and run short 90 degree angle usb-c cables. Carefully run a cable through the stand to a powerbank (plug it in) and fill the channel partway with epoxy using a syringe. Carefully lower the bank into place and let it sit while the epoxy cures. Then remove the powerbank and carefully top off the epoxy. Repeat for each of the slots.
Now you can easily drop the batteries in the correct direction to charge!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Prusament PLA Black
Category: Organization