Plug for Onewheel GT40 Protective Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stronger plug for @rayyong's GT40 Protective Cover to provide beefier impact protection.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
@rayyong did a great job creating the GT40 Protective Cover. But the low profile plug won't save the port if the GT40 is mounted over the top of the fender. So I learnt Tinkercad and created a high profile plug, with an additional cap on top of it.
To build this, first print "GT40Pow.stl" and "GT40Passive.stl" from @rayyong's models. And then print the 2 objects from my model.
Recommended print settings:
- PLA (or stronger materials) with 6 wall loops, 4 top and bottom layers, 25% infill
- (Optional) Use a brim as the contact area is small
It's holding up pretty well against occasional rollovers. But I mostly ride on city sidewalks and paved trails.
It's my first model publish so let me what I can do better! :)